Build your own keyboard-pad and Dior's 3d-printer files

von gatifun · 06.11.2019 16:39 · 10 Antworten · 21 Aufrufe
06.11.2019 16:39 #1
G
gatifun Themenstarter
290 Beiträge
Mine & Others keypad pictures

📎 WhatsApp Image 2019-11-06 at 16.30.13.jpeg 📎 IMG_0404[1].jpg

Ingredients:
Structure: some like these:
https://www.amazon.com/-/es/Switch-Tester-Keyboard-Comprobador-interruptores/dp/B07JNN3JB2
https://es.aliexpress.com/item/32992516941.html?spm=a2g0o.productlist.0.0.3c3650efuNZ6zb&algo_pvid=d978d187-4e64-4c37-9a18-b049cb223883&algo_expid=d978d187-4e64-4c37-9a18-b049cb223883-8&btsid=0b0a050b15953681502382535e8382&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

Brown switches and keycaps (you can test another colors too): https://es.aliexpress.com/item/32682571027.html

Adapter : https://stepstick.pl/?35,en_usbjoy20-adapter-connect-your-atari-amiga-c64-joystick-to-pc!-develop-your-own-usb-device

Cable with this kind of cable, you can play on amiga machine or pc with the adapter: https://www.amazon.es/dp/B01MXYZ8QO/ref=pe_3310721_189395781_TE_dp_1

Other options:
| TTC Speed Silver V2 DIY teclado mecánico personalizado para jugadores interruptor lineal 45gf 3 pines RGB SMD interruptores de intercambio en caliente prevención de contatos
https://a.aliexpress.com/_ExV3JQO
| 40 / 120 Uds 40PIN 20CM línea Dupont macho a macho + hembra y hembra a hembra Cable Dupont para Arduino KIT DIY IBUW
https://a.aliexpress.com/_EGhyYQS
Cable de extensión de controlador megadrive genesis amiga atari commodore para sega, gran oferta
https://a.aliexpress.com/_EIB4CB4

Recipe:
- Mount your prefer disposal structure, with switches and capkeys.
- Cut cable (female side) and join the cables :
Ground cable will have to join all the switches, and we have to find which color is ground. (thanks Djowger!)
For me the colors that worked were:
--- blue for every switch (they have 2 pins, then join blue cable to one of every switch)
- and join on the other pin of each switch:
- - green for shoot
- - red for up
- - black for down
- - orange for right
- - grey for left
maybe if works for everyone or maybe you have to try and test it.

- make a knot on the cable just before exits the box, to stop it and don't break it later

- Put adaptor and weld/solder them after testing.

Enjoy

===========================================================

Thanks to Dior, he prepared some files for 3d printer your key keypad case!!! I add them in one zip
06.11.2019 17:24 #2
R
ruicosta10fc
156 Beiträge
good stuff gati 🙂 top
06.11.2019 22:03 #3
D
djowGer
0 Beiträge
Nice info Gatifun. Just a small correction. The colors varies a lot from cable to cable, so blue is not always ground. From my experience it was mostly black but could be any of the colors. Below is an example of the soldering needed to make it work.



In my example you can see that black/red is soldered to every key, orange is fire button, white is up, blue down, and green and brown are sides.
07.11.2019 18:02 #4
G
gatifun Themenstarter
290 Beiträge
"djowGer":
Nice info Gatifun. Just a small correction. The colors varies a lot from cable to cable, so blue is not always ground. From my experience it was mostly black but could be any of the colors. Below is an example of the soldering needed to make it work.

In my example you can see that black/red is soldered to every key, orange is fire button, white is up, blue down, and green and brown are sides.


Yeah, great info. I edit my first post
Exactly, it must be a previous try to find the right colors. Ground cable will have to join all the switches, and we have to find which color is ground. Good to know Djowger

I specially wanted to share too that you can solder the cables direct to the switch pins too, for me it was easier to understand the procedure.
📎 WhatsApp Image 2019-11-07 at 17.57.45.jpeg
18.07.2022 21:48 #5
B
batis
2 Beiträge
What kind of board can we use it for connecting the wires? I don't have knowledge on that part.
18.07.2022 22:25 #6
G
gatifun Themenstarter
290 Beiträge
Hi Bais, In my keypad, I solded directly the cables to the switch legs
18.07.2022 22:51 #7
B
batis
2 Beiträge
You are cutting RB9 cable and connecting its wires to keys, right?
18.07.2022 22:56 #8
G
gatifun Themenstarter
290 Beiträge
Yep, I cut it, but I think there also are with only one db9 in one extreme and the wire on the other on internet stores.
It is very important to check the right colors for each switch, because not always the colors are the same in every cable.
19.07.2022 12:28 #9
T
thd79
73 Beiträge
Another way to do this is to use a DB9 Breakout board like this:

https://cpc.farnell.com/clever-little-box/clb-dsub09f-10tb-2/d-sub-socket-9-pin-screw-terminals/dp/CN21716?mckv=siJf1Kuvw_dc|pcrid|224645161149|kword||match||plid||slid||product|CN21716|pgrid|45968746254|ptaid|pla-890733048653|&CMP=KNC-GUK-CPC-SHOPPING&s_kwcid=AL!5616!3!224645161149!!!network}!890733048653!&gclid=CjwKCAjwrNmWBhA4EiwAHbjEQM2i4P4-34N0TDgnVzxDDVDrLzacuO64w407qSySGLETPqofo1ZE7xoCnkwQAvD_BwE

which has screw terminals for wire connections. Then use a male-male cable to connect to the computer.
19.07.2022 13:58 #10
G
gatifun Themenstarter
290 Beiträge
I'd prefer not to tell you it is good because I don't know, It seems so,
but, the screws on the sides, maybe don't allow to put it on the conectors. btw, my mist has the same screws but in the machine, female. and it says DE, if you put DB option, the gadget change. I don'tknow
I think you have to ask djowger and playavely in discord, I think they know everything about amigas, I have not got that experience.
30.06.2023 14:04 #11
G
gatifun Themenstarter
290 Beiträge
I added a zip-file with 3dprinter arhives to print your keypad case in the first post, they were done by Dior, thanks mate!!!